![]() The 'g' in Supports Wake-on: pumbg indicates that wake-on-lan by using a 'magic packet' is indeed supported. ![]() lspci | grep -i ethernetÄ 6:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection You can test all this on a home network using a wakeonlan phone app with the MAC address of the supported device. ![]() If you want to check to see if the magic packet flag is set on the NIC card, and you have basic UNIX/Linux knowledge you can load up a live boot of ubuntu or whichever distro and use the "ethtool" utility to see and also set the g flag (magic packet) to the nic. the following Windows Operating Systems: XP, VISTA, Windows 7 and Windows 8. Since this is a PCI card we dont need to find a wakeonlan option in BIOS/UEFI unless you plan to use the onboard nic. This package provides the driver for the Intel 825xx (10/100/1000) Ethernet. With this i used a wake_on_lan utility on my phone and sure enough it was able to send a magic packet and turn on the server instantly. I'm a dual windows/ubuntu user so i looked on my Ubuntu ethtool utility and found out that the wake on lan had already been set to enabled. So I had the same exact issue as you with the Intel Corporation 82574L Gigabit, and could not get my Windows 10 install to show the wake on lan magic packet option in the driver advanced page.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |